• 568exiii - Nikon


    This item is out of stock





    * Compatible With C and N’s Optical Transportation Wireless Slave Flash                 

    One YN568EX III can respectively accept the master unit of YN600EX-RT II, YN568EX II, YN568EX III, 600EX(II)-RT, 580EX II, SB-910/900/800/700, Nikon built-in Flash C command and built-in wireless single of 7D/60D/600D, it realizes wirelessTTL and manual flash and stroboscopic flash.      


    *Supports High-speed Sync     


    The YN568EX III can synchronize with all shutter speeds, realize TTL and manual flash, the maximum shutter sync is up to 1/8000.  


    *TTL Flash with High Guide Number  

    GN58@ISO100, 105mm, support TTL, M, Multi flash. .    


    *Supports Firmware Upgrade               

    The YN568EX III is equipped with the USB interface, you can download the latest firmware from YONGNUO official website to upgrade the speedlite.              


    *Support the Battery Remaining Power Real-time Display            

    The YN568EX III is equipped with the battery electric power display function, allows you to check the battery remaining capacity easily.  


    *High Speed Recycling System         

    The recycling time for full output just takes 2 seconds; you can get high speed current-return experience even without using brand new batteries, which will only takes 3-4 seconds.  


    *Sound Prompt System

    When the sound prompt system is enabled,different sound modes will prompt different working conditions of the speedlite so as to allow you to focus on shooting process.      


    *Supports Electric Zooming(24~105mm )

    Supports automatic and manual zooming, the focal length can be varied between 24~105mm.


    *Multiple Trigger Mode Supported         

    YN568EX III can be triggered by the camera set-top, PC synchronization trigger and wireless optical trigger off the camera.      

    *Automatic Settings Saving,supports custom settings (Fn)

    *Equipped with Large-size LCD display and standard 2.5mm PC interface



    ●Insulated Gate Bipolar Transistor ( IGBT )
    ●Support HSS, the High Speed Sync, up to 1/8000 second, M, MULTI, Sc, Sn, S1, S2
    ●Hot shoe TTL for Nikon
    ●Guide Number 58 (ISO 100, 105mm)
    ●Flash Modes: TTL, M, Multi Mode
    ●Modeling Light
    ●Auto and Manual Zooming Head 24 – 105mm
    ●Auto Zoom for Sensor Size
    ●2.5mm Sync Port
    ●3 Seconds Recycle TimeCons
    ●Zoom Range 24,28 35 50 70 80 105mm   
    ●Flash Time is around 1/200s-1/20000s
    ●8 levels of output control ( 1.128-1/1), 22 levels of fine tuning 
    ●hot shoe, PC Port, USB Port
    ●off camera flash, high-speed sync, second-curtain sync, FEC, FEB, FEV, the electronic flash head zooming, sound prompt, automatically saving setting, power saving mode, overheat protection, custom function, firmware update    


    Suit for:     


    1), Hot shoe TTL mode:

          Nikon D7400 D7300 D7200 D7100 D5600 D5500 D5400 D5300 D5200 D5100 D5000 D3500 D3400 D3300 D3200 D3100 D3000 D700 D300s D200 D100 D80 D90 D40 D40x D60 D4 D3


    2), Wirelss TTL Slave mode:
         Nikon Commander SU-800 
         Nikon SB-910, SB-900, SB-800, SB-700, Commander SU-800, 
         Camera with CLS i-TTL system:D4, D3x, D3s, D3, D2x, D700, D300s, D300, D200, D7000, D90, D80    
         Canon 7D 6D 600D 650D
         Canon Flash 580EX II
         Commander Canon ST-E2